My Lovely Coin (MLC) sustainability report

My Lovely Coin is present on the following networks: Binance Smart Chain, Polygon, Solana.

BNB Smart Chain, the programmable chain of BNB Chain and formerly styled Binance Smart Chain, reaches agreement through Proof of Staked Authority, a design that borrows stake-weighted election from delegated proof of stake and rotating, permissioned block production from proof of authority. Bonded stake decides who may produce blocks rather than who wins any individual slot. The network keeps an active set of forty-five operators, ranked by the amount of the native asset bonded to them through self-delegation and through delegation from holders. The twenty-one highest-ranked form the cabinet tier and the next twenty-four are candidates, with everyone below inactive and producing nothing. Rankings are recomputed once a day, so membership of the set turns over on a daily cycle rather than per block.

Within each epoch a consensus group of twenty-one is drawn from the active set, weighted heavily toward the cabinet tier, and those operators take turns proposing in a fixed rotation. Turn length and epoch length are protocol parameters that have been retuned repeatedly as block intervals shortened: successive upgrades cut the interval from three seconds to 1.5, then to 0.75 in mid-2025, and to 0.45 seconds in January 2026. A separate voting layer sits above the rotation, in which validators sign attestations on recent blocks; once enough signatures accumulate a block is treated as final, giving deterministic finality in roughly a second. Should that voting layer stall, the chain falls back to confirmation by accumulated depth, which takes minutes rather than seconds.

Security rests on an honest supermajority of a deliberately small elected set, backed by on-chain penalty logic. A slashing contract watches for double signing, for contradictory attestations in the fast-finality vote, and for repeated failure to produce during an assigned turn. Consequences range from temporary jailing and lost rewards through to removal from the set and forfeiture of part of a validator's own bonded stake. The trade-off is deliberate: a compact, frequently re-elected validator set buys very short block intervals and cheap execution, at the cost of the broader operator base that larger validator sets provide.

Polygon PoS is an EVM-compatible proof-of-stake network that runs its own validator set and anchors itself to Ethereum by posting periodic checkpoints there. It should not be confused with the other chains that have carried the Polygon name: the zero-knowledge rollup operated under that brand was shut down in 2026, and chains built with Polygon's development kit are independent networks with their own validators. Polygon PoS executes transactions and holds its own transaction data, so it is a sidechain or commit-chain rather than a rollup inheriting Ethereum's execution and data-availability guarantees.

The architecture splits into two node layers that every validator runs together. The execution layer, derived from Go Ethereum, assembles transactions into blocks. The consensus layer coordinates the validator set, tracks staking and finalizes checkpoints; it was rebuilt in 2025 on the Cosmos SDK and CometBFT, which brought checkpoint-based finality down from a wait of one to two minutes to a matter of seconds and capped how deeply the chain may reorganize. At intervals the consensus layer gathers the blocks produced since the last checkpoint into a Merkle tree and submits the root to contracts on Ethereum, where it becomes the reference point for bridge withdrawals.

Staking itself lives on Ethereum. Validators bond the network's native asset, POL, which replaced MATIC in the migration that began in 2024 and now serves as both the staking asset and the gas asset, into contracts on Ethereum mainnet; holders delegate through share-based pools in the same contracts. The active set is capped, so entry requires displacing an incumbent by stake.

Block production changed materially with the Rio upgrade in late 2025. Rather than rotating producers by stake-weighted draw over short intervals, validators now vote, with voting power weighted by stake, to elect the producer or producers for a span. Because a single elected producer builds the span, competing chain tips largely disappear and reorganizations are eliminated. The same upgrade introduced witness-based verification, letting a validator check a block against a supplied witness instead of holding full state, which lowers the storage burden of participating.

Solana runs a proof-of-stake network in which the right to produce a block is allocated in proportion to the quantity of the native asset staked to each validator. What sets the design apart is that ordering is established before agreement is sought. A designated leader runs a sequential hash chain, each output feeding the next input, so the chain cannot be computed faster than a fixed number of steps and a transaction's position within it is evidence of when that transaction was received. This construction, called proof of history, spares validators from negotiating timestamps with one another and lets the rest of the protocol treat the order of events as already settled.

Leadership is not auctioned block by block. At the start of each epoch, which runs for roughly two days, a schedule is derived deterministically from the active stake distribution and assigns every short slot in the epoch to a named validator. Slots follow one another a few hundred milliseconds apart. The scheduled leader gathers transactions, executes them and streams the resulting block to the rest of the set in small fragments relayed through a tree structure rather than pushed to every peer at once. Receiving validators replay the block independently and publish votes for the fork they consider canonical.

Fork choice weights those votes by stake, and each vote commits a validator to its chosen fork for a period that doubles with every further confirmation, so abandoning a block grows steadily more costly. A block that a supermajority of stake has voted on is treated as confirmed within about a second, and it is locked in permanently once enough additional confirmations accumulate, which takes on the order of ten seconds. Safety rests on the assumption that participants acting dishonestly control less than a third of staked value. A revision of the voting layer, approved in a stake-weighted validator vote, is being activated on the main network in stages; it retains stake-weighted validation and the existing block distribution scheme while replacing the incremental lockout rule with direct voting that settles in one or two rounds.

My Lovely Coin is present on the following networks: Binance Smart Chain, Polygon, Solana.

BNB Smart Chain pays for its own security out of transaction fees rather than out of new issuance. The native asset carries no protocol-level block subsidy, so every reward reaching a validator or a delegator originates in gas paid by users. When a block is finalized the proposer's collected fees are routed into system contracts and split three ways. A governed fraction is sent to an unspendable address and permanently removed from supply, a slice accumulates in a reward vault used for network-wide purposes such as paying for fast-finality attestations, and the balance sits in the validator-set contract until it is distributed, on a daily cycle, to active validators and the holders who delegated to them.

Participation is staking-based. An operator must self-delegate a substantial amount of the native asset before it can be considered for the active set, and holders may bond additional stake to any validator to lift its ranking. Delegators receive their proportional share of whatever the validator earns, after the commission that validator sets for itself, and only the forty-five ranked operators earn at all: stake bonded to an inactive validator yields nothing. Unbonding is subject to a waiting period, so stake cannot be pulled out the instant misbehavior comes to light.

Penalties are graduated. Missing assigned turns or going offline for a sustained stretch triggers jailing, during which the validator produces nothing and earns nothing. Double signing and contradictory attestations in the finality vote are treated far more severely and can cost the validator a portion of its own bonded stake alongside ejection from the set.

Users face a conventional gas-metered fee model inherited from the Ethereum virtual machine. Each operation carries a gas cost, the sender chooses a gas price, and the total is charged in the native asset. There is no separate storage rent, so the cost of persisting state is bundled into execution gas, and deploying or calling a contract is priced purely by the computation and storage it consumes. The minimum acceptable gas price is a coordinated parameter that operators and infrastructure providers have revised downward several times, keeping ordinary transfers and contract calls inexpensive in absolute terms.

Validators on Polygon PoS are paid for two distinct jobs: producing and executing blocks on the chain itself, and signing the checkpoints submitted to Ethereum. Rewards are distributed per checkpoint, funded by protocol issuance of the native asset together with an allocation of transaction fees, and they are apportioned by stake and by how reliably each validator signed. Because the staking contracts sit on Ethereum, a validator's operating costs include Ethereum gas for checkpoint submission and for staking transactions, a meaningful expense that chain-local fee models do not capture.

Delegation works through validator-specific share pools. A holder exchanges the native asset for shares in a chosen validator, and as rewards accrue the redemption value of each share rises, so returns appear as appreciation of the share rather than as separate payments. Validators take a commission before the remainder flows to their delegators. Stake withdrawn from a validator remains locked for a defined number of checkpoints before it can be moved out, while switching between validators carries no such delay.

The penalty structure is weighted toward lost income. The staking contracts define consequences for double-signing and for sustained unavailability, but in normal operation the dominant economic pressure on a validator is forfeited reward: missed checkpoint signatures and poor block-production uptime reduce what a validator and its delegators earn. The producer election introduced by the Rio upgrade also redistributes fee income, including value captured from transaction ordering, toward validators that are not currently producing, so that supporting the chain stays worthwhile for the rest of the set.

Users pay fees in the native asset under a base-fee-plus-tip model. The base fee moves with how full recent blocks have been and is routed to a burn path, while the optional tip goes to the producer. A 2026 protocol change made that base-fee destination configurable in order to fund a time-limited program that recycles fees for one narrow category of activity, with ordinary transactions continuing to follow the burn path. There is no storage rent, and contract deployment and execution are charged purely as metered gas on the resources they consume.

Two streams of payment reach validators. The protocol issues new units of the native asset on a defined schedule and distributes them at the close of every epoch to validators and to the stake delegated to them, in proportion both to that stake and to the voting credits the validator actually accrued over the epoch; an operator that missed its slots or stopped voting accrues fewer credits and receives a correspondingly smaller share. Holders who do not wish to run hardware delegate through a stake account to an operator of their choice, retain control of that account, and receive the reward net of whatever commission the operator has set. Delegated stake becomes active and inactive only at epoch boundaries, so capital committed to securing the network cannot be pulled out on demand.

Users pay a fixed base fee for every signature a transaction carries. Half of that amount is destroyed and half is paid to the validator that produced the block. A transaction may attach an optional priority fee, quoted per unit of requested compute, which under a protocol change adopted in 2025 goes in full to the block producer; this is the mechanism that rations capacity when demand exceeds what a slot can hold. Program execution is metered in compute units against a per-transaction ceiling, so the cost of a contract call tracks the work it requests rather than a flat tariff.

Storage is charged once, not continuously. An account has to hold a minimum balance scaled to the number of bytes it occupies in order to be exempt from rent, and that balance is a refundable deposit rather than a fee: closing the account returns it. Recurring rent collection has been switched off at the protocol level and rent-paying accounts can no longer be created, so ongoing storage charges do not form part of the fee model as it now stands.

Staked assets are not confiscated by the protocol. No implemented mechanism automatically destroys a validator's stake for equivocation or for being offline; the cost of downtime is forgone reward set against operating expense, including the fees an operator pays to submit its own votes. A scheme to record provable duplicate-block violations on chain, as groundwork for any future economic penalty, is still at proposal stage and would not itself remove stake.

My Lovely Coin is present on the following networks: Binance Smart Chain, Polygon, Solana.

The energy figure for BNB Smart Chain is built upward from the node population rather than downward from operator revenue, which is the appropriate treatment for a staked network where block production is not a computational race. Nothing about the fee model or the value of the native asset determines how much hardware is deployed: the size of the validator set is fixed by protocol, and the wider population of non-validating nodes is driven by demand for chain access.

The estimate has three inputs. The first is the number of machines. The elected validator set is known from the chain itself, while the surrounding population of full and archive nodes is approximated from peer-discovery crawls, public node listings and network scans, all of which observe only nodes willing to accept inbound connections and therefore tend toward undercounting. The second input is a representative hardware profile per node, inferred from the client software's published requirements, which on this chain are demanding relative to slower networks of the same family, since sub-second block intervals and rapid state growth push operators toward high core counts, large memory and fast solid-state storage. The third is the electrical draw of such a machine, taken from measurement of comparable configurations on the bench, both under sustained load and at idle, because a validator idles between its assigned turns and that baseline draw is a real part of the total. Aggregating the per-machine figure across the estimated population, with an allowance for the overhead of the facilities housing it, gives the network total.

Several qualifications belong with the result. It is a modeled estimate resting on observed node counts and stated software requirements, not metered consumption at the socket. Where evidence is thin, the assumptions chosen lean toward overstating rather than understating consumption. Figures are revised as crawler coverage and hardware information improve. Finally, apportioning a share of the network total to any single asset issued on the chain is done from observed on-chain transfer volumes, which measures how heavily an asset is used rather than the energy it uniquely causes.

Polygon PoS is a staked network, so its consumption is modeled from the machines that run it rather than from mining economics. Two components are added together. The first is the chain's own infrastructure: every validator operates a paired execution and consensus process, which in practice means a heavier machine than a single-process chain of comparable throughput would need, plus the wider population of full and archive nodes serving applications and data consumers. The second is a share of Ethereum's consumption, because the checkpoint and staking transactions that give Polygon PoS its anchor are executed by Ethereum's validators; that share is apportioned by the gas those transactions consume as a fraction of total Ethereum gas.

For the chain's own component, the node count is estimated from peer-discovery crawls, public node listings and the validator set recorded on chain, with the understanding that crawls see only nodes willing to accept connections. A representative hardware profile is inferred from the published requirements for running both node processes, and the electrical draw of such a configuration is taken from measurement of comparable machines, at load and at idle, since a validator's hardware draws power continuously regardless of whether it is currently producing. Aggregating across the estimated population, with an allowance for the overhead of the facilities housing it, gives the chain-local total.

The usual qualifications apply and matter here. The node population and the hardware behind it are inferred from public observation and stated software requirements, not metered. Where evidence is incomplete, the assumptions used err toward a higher figure rather than a lower one. The estimate is revised as observation improves. The gas-based apportionment of Ethereum's consumption is a convention rather than a physical measurement, since Ethereum's validators would run whether or not the checkpoints were posted. And where a share of the network total is attributed to an individual asset issued on the chain, that attribution is made from observed on-chain transfer volumes, which reflects how heavily an asset is used rather than the energy it uniquely causes.

The figure reported for this network is assembled from the machines that run it rather than inferred from any single aggregate quantity. The starting point is a count of active nodes, put together from network crawlers, publicly reachable cluster and gossip information, and data operators choose to publish. That population is then divided by role, because a validator taking part in voting, a machine that only replays the ledger, and the infrastructure that answers application requests do not draw comparable amounts of power.

Each role is matched to a representative hardware profile derived from the resources the client software is documented to need. Requirements here are heavy by the standards of proof-of-stake systems, running to many processor cores, large memory and fast solid-state storage, and the profiles reflect that rather than assuming commodity equipment. Electrical draw per profile is taken from controlled bench measurement of equivalent devices, capturing both the load imposed by processing and the draw of a machine that is powered up but idle, since a node consumes electricity continuously whether or not it is producing a block. Multiplying profiles by the estimated population across the hours of the reporting period gives consumption for the network as a whole. Where a figure is attributed to one asset issued on the network rather than to the network itself, the share is taken from observed on-chain transfer activity for that asset.

The output is an estimate and should be read as one. The node count rests on what is visible from outside, and operators are under no obligation to be visible; the hardware mix is inferred from stated requirements rather than surveyed; and facility overheads such as cooling and power conversion are approximated rather than metered. Where the evidence does not settle a question, the assumption adopted is the one more likely to overstate consumption than understate it, and figures are restated as observation improves or as protocol changes alter the work a node must perform. The network's own climate reporting is published at Solana Climate Dashboard.

My Lovely Coin is present on the following networks: Binance Smart Chain, Polygon, Solana.

The renewable share reported for BNB Smart Chain follows from where its machines physically run, so the method begins with locating them. Node addresses visible through peer discovery and public network observation are resolved to hosting providers, autonomous systems and countries, producing an approximate geographic distribution of the validator and full-node population. Where that observation is too sparse to stand on its own, the distribution of a network with a comparable staking design and operator economics is substituted, on the reasoning that similar incentives attract similar operators into similar hosting markets.

That distribution is then matched against national electricity statistics. Each country's share of generation coming from renewable sources is taken from Share of electricity generated by renewables, compiled and processed by Our World in Data from Ember's yearly electricity datasets and the Energy Institute's Statistical Review of World Energy. Weighting those country-level shares by the portion of estimated node capacity sitting in each gives a single renewable percentage for the network.

Energy intensity is a separate quantity and is defined marginally: the additional electricity associated with one further transaction being processed, rather than the annual total divided by the transaction count. On a chain that produces blocks on a fixed schedule whether or not they are full, the marginal figure is far smaller than a simple average would suggest, and the two should not be used interchangeably.

Three limits are worth stating plainly. An observed hosting location identifies a grid but not a procurement arrangement, so an operator buying renewable power on a carbon-heavy grid is indistinguishable from one that is not. Cloud and proxy infrastructure can place a node's apparent location away from the hardware actually running it. And national annual averages smooth over the hourly and seasonal variation in generation mix that a continuously running machine actually draws from.

The renewable share attributed to Polygon PoS depends on where its infrastructure physically sits, so the method begins with geolocation. Nodes visible through peer discovery and public network observation are resolved to hosting providers, autonomous systems and countries, giving an approximate map of where validator and full-node capacity is concentrated. Coverage is never complete; where it is too thin to be relied on, the geographic distribution of a network with a similar staking design and operator economics is used as a proxy. The same exercise applies to the portion of Ethereum's footprint brought in through checkpointing, using Ethereum's own observed node distribution.

Those locations are then matched to national electricity statistics. Each country's share of generation from renewable sources comes from Share of electricity generated by renewables, compiled and processed by Our World in Data from Ember's yearly electricity datasets and the Energy Institute's Statistical Review of World Energy. Weighting the country-level shares by the estimated node capacity in each produces a single renewable figure for the network.

Energy intensity is reported as a marginal quantity: the extra electricity associated with processing one more transaction, not the annual total divided by the number of transactions. On a chain whose validators run continuously and produce blocks on a schedule, that marginal figure is much smaller than a simple average would suggest, and the two are not interchangeable.

The limitations are inherent to the approach. An observed hosting location identifies a grid, not a power purchase agreement, so an operator sourcing renewable electricity on a carbon-heavy grid is invisible to the method. Cloud hosting and proxying can misplace a node relative to the hardware actually running it. Annual national averages cannot capture the hourly and seasonal swings in generation mix that continuously running machines draw from. And the borrowed share of Ethereum's footprint carries whatever geographic error is present in Ethereum's own distribution.

The renewable share is derived geographically. Node locations are inferred from what the network exposes about itself: addresses observable through crawlers and public cluster information, resolved to a country or region. Coverage is never complete, because operators may sit behind hosting providers or relays that obscure where the hardware physically sits. Where the geographic spread of this network cannot be observed directly, the distribution of a structurally similar network stands in as a proxy, chosen because its validator economics and agreement protocol place comparable demands on operators and therefore tend to attract them to comparable locations.

Each located node is then assigned the generation mix of the grid that serves it. Those regional mixes come from Share of electricity generated by renewables, compiled by Our World in Data from Ember's yearly electricity data and the Energy Institute's Statistical Review of World Energy. Weighting each region's renewable share by the estimated consumption sitting in that region produces a network-wide proportion. The result describes the grids the infrastructure draws from, not contractual purchases: an operator buying renewable certificates is not treated differently from a neighbor on the same grid, because that distinction cannot be observed from outside.

Energy intensity is reported separately and means something narrower than total consumption divided by transaction count. It is the marginal quantity of energy associated with processing one further transaction. That distinction matters for a network of this type, where validators run continuously at close to constant power regardless of how full the blocks are, so the incremental energy attached to an additional transaction is small while the standing consumption of the validator set is not. Both the renewable share and the intensity figure therefore move with two separate things: the composition and location of the node population, and the grid statistics for the years covered, which are themselves restated as national reporting is revised.

My Lovely Coin is present on the following networks: Binance Smart Chain, Polygon, Solana.

Emissions for BNB Smart Chain are derived from the same geographic picture used for the energy mix, then converted using regional carbon factors. Node locations are approximated from peer-discovery data, public network observation and hosting attribution, and where coverage is insufficient the distribution of a structurally similar staked network stands in. Each location carries the carbon intensity of its national grid, drawn from Carbon intensity of electricity generation, processed by Our World in Data from Ember's yearly electricity data and the Energy Institute's Statistical Review of World Energy and published under a CC BY 4.0 license. Multiplying the electricity attributed to each region by that region's grams of carbon dioxide equivalent per kilowatt-hour, and summing across regions, gives the annual emissions figure.

The split between scopes matters for interpretation. Scope 1 covers emissions from sources the network's operators control directly, such as on-site fuel combustion, which for a population of general-purpose servers in rented facility space is generally negligible and is reported as such. Scope 2 covers the indirect emissions embodied in the electricity those machines purchase from the grid, and that is where effectively the whole footprint sits. Emissions upstream of operation, in the manufacture and eventual disposal of the hardware, fall outside this accounting boundary.

Greenhouse-gas intensity mirrors the energy definition: the incremental emissions associated with one additional transaction, not the annual total divided by throughput.

Uncertainty in the emissions figure compounds the uncertainty in the two inputs behind it. Any error in the estimated electricity total propagates directly into the result, and the geographic attribution adds error of its own, since grid carbon intensity varies by more than an order of magnitude between countries and a misplaced share of node capacity moves the answer substantially. Annual national averages also mask the hourly variation in grid intensity to which a machine running around the clock is fully exposed.

Emissions attributed to Polygon PoS rest on the same geographic work as the renewable share, with regional carbon factors applied in place of renewable percentages. Validator and full-node locations are approximated from peer discovery, public network observation and hosting attribution, and a comparable network's distribution stands in wherever direct observation is too sparse. The share of Ethereum's footprint brought in through checkpointing is located the same way, against Ethereum's own node distribution. Each location is paired with the carbon intensity of its national grid, taken from Carbon intensity of electricity generation, processed by Our World in Data from Ember's yearly electricity data and the Energy Institute's Statistical Review of World Energy, and made available under a CC BY 4.0 license. Multiplying regional electricity by regional grams of carbon dioxide equivalent per kilowatt-hour, then summing, yields the annual total.

Scope matters to how the result should be read. Scope 1 captures emissions from sources under the direct control of the network's operators, such as fuel burned on site, which for servers in rented facility space is generally negligible and reported as such. Scope 2 captures the indirect emissions embodied in purchased electricity, and that is where essentially the entire footprint falls. Manufacture and disposal of the hardware sit outside the boundary of this accounting.

Greenhouse-gas intensity is defined marginally, as the incremental emissions associated with one additional transaction rather than the annual total spread across throughput.

The error bars on the emissions figure inherit those on the electricity estimate and add to them. Grid carbon intensity differs by more than an order of magnitude between countries, so a misallocated share of node capacity shifts the result considerably, and annual national averages hide the hourly swings in intensity that machines running around the clock experience in full.

Emissions are derived from the same geographic picture used for energy sources, applied to a different set of grid statistics. Node locations are inferred from addresses observable through crawlers and public cluster information and resolved to a region; where direct observation falls short, the geographic distribution of a structurally comparable network is substituted, selected on the basis that its incentive design and agreement protocol impose similar operating demands.

Each region is then paired with a carbon intensity for its electricity, taken from Carbon intensity of electricity generation, compiled by Our World in Data from Ember's yearly electricity data and the Energy Institute's Statistical Review of World Energy and made available under the CC BY 4.0 licence. Multiplying the electricity estimated to be consumed in a region by that region's carbon intensity, and summing across regions, gives the emissions attributable to running the network.

The disclosure separates two scopes. Scope 1 covers emissions from sources the operators of the infrastructure control directly, such as fuel burned on site; for a network of this kind, whose nodes are ordinary servers in rented facilities, this is normally nil or immaterial, and a zero figure reflects the absence of such sources rather than an omission. Scope 2 covers the indirect emissions embodied in the electricity those machines purchase, and is where essentially the whole footprint of this network falls.

Greenhouse gas intensity follows the same marginal logic as its energy counterpart: it expresses the emissions associated with one additional transaction rather than an average obtained by dividing an annual total by throughput. Because validators consume electricity at a fairly steady rate whether or not blocks are full, the marginal figure is small and is not a proxy for the footprint of the network as a whole. Both the absolute emissions and the intensity figure are sensitive to the grid statistics underlying them, which are revised as national energy reporting is updated.