Aster (ASTER) sustainability report

NameBlockNodes SAS
Relevant legal entity identifier969500PZJWT3TD1SUI59
Name of the crypto-assetAster
Beginning of the period to which the disclosure relates2025-09-27
End of the period to which the disclosure relates2026-09-27
Energy consumption477.57978 kWh/a

Consensus Mechanism

Aster is present on the following networks: Binance Smart Chain.

BNB Smart Chain, the programmable chain of BNB Chain and formerly styled Binance Smart Chain, reaches agreement through Proof of Staked Authority, a design that borrows stake-weighted election from delegated proof of stake and rotating, permissioned block production from proof of authority. Bonded stake decides who may produce blocks rather than who wins any individual slot. The network keeps an active set of forty-five operators, ranked by the amount of the native asset bonded to them through self-delegation and through delegation from holders. The twenty-one highest-ranked form the cabinet tier and the next twenty-four are candidates, with everyone below inactive and producing nothing. Rankings are recomputed once a day, so membership of the set turns over on a daily cycle rather than per block.

Within each epoch a consensus group of twenty-one is drawn from the active set, weighted heavily toward the cabinet tier, and those operators take turns proposing in a fixed rotation. Turn length and epoch length are protocol parameters that have been retuned repeatedly as block intervals shortened: successive upgrades cut the interval from three seconds to 1.5, then to 0.75 in mid-2025, and to 0.45 seconds in January 2026. A separate voting layer sits above the rotation, in which validators sign attestations on recent blocks; once enough signatures accumulate a block is treated as final, giving deterministic finality in roughly a second. Should that voting layer stall, the chain falls back to confirmation by accumulated depth, which takes minutes rather than seconds.

Security rests on an honest supermajority of a deliberately small elected set, backed by on-chain penalty logic. A slashing contract watches for double signing, for contradictory attestations in the fast-finality vote, and for repeated failure to produce during an assigned turn. Consequences range from temporary jailing and lost rewards through to removal from the set and forfeiture of part of a validator's own bonded stake. The trade-off is deliberate: a compact, frequently re-elected validator set buys very short block intervals and cheap execution, at the cost of the broader operator base that larger validator sets provide.

Incentive Mechanisms and Applicable Fees

Aster is present on the following networks: Binance Smart Chain.

BNB Smart Chain pays for its own security out of transaction fees rather than out of new issuance. The native asset carries no protocol-level block subsidy, so every reward reaching a validator or a delegator originates in gas paid by users. When a block is finalized the proposer's collected fees are routed into system contracts and split three ways. A governed fraction is sent to an unspendable address and permanently removed from supply, a slice accumulates in a reward vault used for network-wide purposes such as paying for fast-finality attestations, and the balance sits in the validator-set contract until it is distributed, on a daily cycle, to active validators and the holders who delegated to them.

Participation is staking-based. An operator must self-delegate a substantial amount of the native asset before it can be considered for the active set, and holders may bond additional stake to any validator to lift its ranking. Delegators receive their proportional share of whatever the validator earns, after the commission that validator sets for itself, and only the forty-five ranked operators earn at all: stake bonded to an inactive validator yields nothing. Unbonding is subject to a waiting period, so stake cannot be pulled out the instant misbehavior comes to light.

Penalties are graduated. Missing assigned turns or going offline for a sustained stretch triggers jailing, during which the validator produces nothing and earns nothing. Double signing and contradictory attestations in the finality vote are treated far more severely and can cost the validator a portion of its own bonded stake alongside ejection from the set.

Users face a conventional gas-metered fee model inherited from the Ethereum virtual machine. Each operation carries a gas cost, the sender chooses a gas price, and the total is charged in the native asset. There is no separate storage rent, so the cost of persisting state is bundled into execution gas, and deploying or calling a contract is priced purely by the computation and storage it consumes. The minimum acceptable gas price is a coordinated parameter that operators and infrastructure providers have revised downward several times, keeping ordinary transfers and contract calls inexpensive in absolute terms.

Energy consumption sources and methodologies

Aster is present on the following networks: Binance Smart Chain.

The energy figure for BNB Smart Chain is built upward from the node population rather than downward from operator revenue, which is the appropriate treatment for a staked network where block production is not a computational race. Nothing about the fee model or the value of the native asset determines how much hardware is deployed: the size of the validator set is fixed by protocol, and the wider population of non-validating nodes is driven by demand for chain access.

The estimate has three inputs. The first is the number of machines. The elected validator set is known from the chain itself, while the surrounding population of full and archive nodes is approximated from peer-discovery crawls, public node listings and network scans, all of which observe only nodes willing to accept inbound connections and therefore tend toward undercounting. The second input is a representative hardware profile per node, inferred from the client software's published requirements, which on this chain are demanding relative to slower networks of the same family, since sub-second block intervals and rapid state growth push operators toward high core counts, large memory and fast solid-state storage. The third is the electrical draw of such a machine, taken from measurement of comparable configurations on the bench, both under sustained load and at idle, because a validator idles between its assigned turns and that baseline draw is a real part of the total. Aggregating the per-machine figure across the estimated population, with an allowance for the overhead of the facilities housing it, gives the network total.

Several qualifications belong with the result. It is a modeled estimate resting on observed node counts and stated software requirements, not metered consumption at the socket. Where evidence is thin, the assumptions chosen lean toward overstating rather than understating consumption. Figures are revised as crawler coverage and hardware information improve. Finally, apportioning a share of the network total to any single asset issued on the chain is done from observed on-chain transfer volumes, which measures how heavily an asset is used rather than the energy it uniquely causes.

Key energy sources and methodologies

Aster is present on the following networks: Binance Smart Chain.

The renewable share reported for BNB Smart Chain follows from where its machines physically run, so the method begins with locating them. Node addresses visible through peer discovery and public network observation are resolved to hosting providers, autonomous systems and countries, producing an approximate geographic distribution of the validator and full-node population. Where that observation is too sparse to stand on its own, the distribution of a network with a comparable staking design and operator economics is substituted, on the reasoning that similar incentives attract similar operators into similar hosting markets.

That distribution is then matched against national electricity statistics. Each country's share of generation coming from renewable sources is taken from Share of electricity generated by renewables, compiled and processed by Our World in Data from Ember's yearly electricity datasets and the Energy Institute's Statistical Review of World Energy. Weighting those country-level shares by the portion of estimated node capacity sitting in each gives a single renewable percentage for the network.

Energy intensity is a separate quantity and is defined marginally: the additional electricity associated with one further transaction being processed, rather than the annual total divided by the transaction count. On a chain that produces blocks on a fixed schedule whether or not they are full, the marginal figure is far smaller than a simple average would suggest, and the two should not be used interchangeably.

Three limits are worth stating plainly. An observed hosting location identifies a grid but not a procurement arrangement, so an operator buying renewable power on a carbon-heavy grid is indistinguishable from one that is not. Cloud and proxy infrastructure can place a node's apparent location away from the hardware actually running it. And national annual averages smooth over the hourly and seasonal variation in generation mix that a continuously running machine actually draws from.

Key GHG sources and methodologies

Aster is present on the following networks: Binance Smart Chain.

Emissions for BNB Smart Chain are derived from the same geographic picture used for the energy mix, then converted using regional carbon factors. Node locations are approximated from peer-discovery data, public network observation and hosting attribution, and where coverage is insufficient the distribution of a structurally similar staked network stands in. Each location carries the carbon intensity of its national grid, drawn from Carbon intensity of electricity generation, processed by Our World in Data from Ember's yearly electricity data and the Energy Institute's Statistical Review of World Energy and published under a CC BY 4.0 license. Multiplying the electricity attributed to each region by that region's grams of carbon dioxide equivalent per kilowatt-hour, and summing across regions, gives the annual emissions figure.

The split between scopes matters for interpretation. Scope 1 covers emissions from sources the network's operators control directly, such as on-site fuel combustion, which for a population of general-purpose servers in rented facility space is generally negligible and is reported as such. Scope 2 covers the indirect emissions embodied in the electricity those machines purchase from the grid, and that is where effectively the whole footprint sits. Emissions upstream of operation, in the manufacture and eventual disposal of the hardware, fall outside this accounting boundary.

Greenhouse-gas intensity mirrors the energy definition: the incremental emissions associated with one additional transaction, not the annual total divided by throughput.

Uncertainty in the emissions figure compounds the uncertainty in the two inputs behind it. Any error in the estimated electricity total propagates directly into the result, and the geographic attribution adds error of its own, since grid carbon intensity varies by more than an order of magnitude between countries and a misplaced share of node capacity moves the answer substantially. Annual national averages also mask the hourly variation in grid intensity to which a machine running around the clock is fully exposed.